* Dont use raise_error by itself (avoids warning)
* Add coverage for AccountFilter
* Improve coverage and refactor for Subscription#lease_seconds
* Improve coverage and refactor for NotificationMailer
* Simplify assignment of min/max threshold on subscription
* Fix#2473 - Use sidekiq scheduler to refresh PuSH subscriptions instead of cron
Fix an issue where / in domain would raise exception in TagManager#normalize_domain
PuSH subscriptions refresh done in a round-robin way to avoid hammering a single
server's hub in sequence. Correct handling of failures/retries through Sidekiq (see
also #2613). Optimize Account#with_followers scope. Also, since subscriptions
are now delegated to Sidekiq jobs, an uncaught exception will not stop the entire
refreshing operation halfway through
Fix#2702 - Correct user agent header on outgoing http requests
* Add test for SubscribeService
* Extract #expiring_accounts into method
* Make mastodon:push:refresh no-op
* Queues are now defined in sidekiq.yml
* Queues are now in sidekiq.yml
* Likely fix#2458, fix#2031 - handle out-of-order deletes for statuses
If a delete arrives before the original status, cache that information
for 6h, and if the original status arrives in that window, ignore it
* Add test case
Fix#2196 - Respond with 201 when Salmon accepted, 400 when unverified
Fix#2629 - Correctly handle confirm_domain? for local accounts
Unify rules for extracting author acct from XML, prefer <email>, fall back
to <name> + <uri> (see also #2017, #2172)
* Replace browserify with webpack
* Add react-intl-translations-manager
* Do not minify in development, add offline-plugin for ServiceWorker background cache updates
* Adjust tests and dependencies
* Fix production deployments
* Fix tests
* More optimizations
* Improve travis cache for npm stuff
* Re-run travis
* Add back support for custom.scss as before
* Remove offline-plugin and babili
* Fix issue with Immutable.List().unshift(...values) not working as expected
* Make travis load schema instead of running all migrations in sequence
* Fix missing React import in WarningContainer. Optimize rendering performance by using ImmutablePureComponent instead of
React.PureComponent. ImmutablePureComponent uses Immutable.is() to compare props. Replace dynamic callback bindings in
<UI />
* Add react definitions to places that use JSX
* Add Procfile.dev for running rails, webpack and streaming API at the same time
* Add coverage for create with empty acct value
* Add coverage for create with webfinger failure
* Add coverage for create with webfinger providing bad values
* Add coverage for create when webfinger is good
* Add coverage for session[:remote_follow] having data
* Simplify how remote follow pulls acct from session
* Remote follow behaves more like model
* Move the discovery portions of remote follow out of controller
* Check for suspended accounts
* Naive approached to timeline filtering
* Convert allowed_languages into a db column
* Allow users to choose languages to see statuses in
* Style list items as two columns
* Add a hint to explain language filtering preference
* Add coverage for admin/confirmations controller
* Coverage for statuses controller show action
* Add coverage for admin/domain_blocks controller
* Add coverage for settings/profiles#update
This adds a test for the `Feed#get` method. While the data
transformations in `Feed#get` may seem redundant, they are important to
maintain the order from Redis. The tests I wrote will fail if someone
tries to refactor away this "redundancy" (as I tried to do in the first
iteration of this change).
In #2110, a new attachment type "unknown" was introduced for
attachments that were rejected due to a domain being blocked using
reject_media. However, the "type" field was never set to "unknown"
because a default value of "0" (image) is set for that column,
causing the `type.blank?` expression to always equal false.
This version uses type_changed? instead, causing the type to be set
to "unknown" unless a type has been explicitly set. This introduces
a small change in behaviour causing the type to be set to unknown
before paperclip calls `before_post_process`. Presumably this
behaviour is more appropriate than the current one because the
attachment type has not been determined by that point.
Included are new tests for `ProcessFeedService` and
`UpdateRemoteProfileService` which now check that remote media is
downloaded for non-blocked domains and is rejected for others.
* Add render_views in more places
* Delegate methods from account to user with allow nil true, so that admin accounts show view renders when missing a user
* Use actual account instances in authorize follow controller spec
* Add rough outline of coverage needed for public timeline
* Specs for visibility, replies, boosts
* Specs for silenced account
* Specs for local_only option
* Specs for blocks and mutes
* Add tentative spec around including other silenced account statuses
* Add with_public_visibility scope
* Add simple coverage for tag_timeline
* Tag timeline includes replies
* Replace tag.statuses with a tagged_with scope in tag timeline method
* Use with_public_visibility in tag timeline
* Extract common scope between public and tag timelines to method
* Extract local domain check to local_only scope
* Extract local_only check to starting scope method
* Move list of excluded from timeline account ids to account model
* Simplify excluded accounts list on account model
* Only join accounts when needed
* Rename method for account specific filtering
* Extract method for account exclusions
* Fix bug where silenced accounts were not including statuses from other silenced accounts
* DRY up filter application from account or no account
* timeline_scope can be private
* Add spec showing that account can find its excluded accounts ids
* Add spec which fails if local_only does not have a left outer join
* rubocop
* Instead of parsing shared status contents verbatim, make roundtrip
to purported original URL. Confirm that the "original" URL is from the
same domain as the author it claims to be from.
* Fix obvious typo, add comment
* Use URI look-up first
* Add test, update Goldfinger dependency to make less useless HTTP requests per Webfinger lookup
* OEmbed support for PreviewCard
* Improve ProviderDiscovery code failure treatment
* Do not crawl links if there is a content warning, since those
don't display a link card anyway
* Reset db schema
* Fresh migrate
* Fix rubocop style issues
Fix#1681 - return existing access token when applicable instead of creating new
* Fix test
* Extract http client to helper
* Improve oembed controller
* Add coverage for domain block service with silence
* Get rid of warning about find_each and order
* Move domain_block to attr_reader
* Move optional clear_media into silence_accounts method
* Use blocked_domain method to reduce passed vars
* Extract blocked_domain_accounts method to find accounts on the domain
* Extract media_from_blocked_domain method to find relevant attachments
* Separate destruction of account images and account attachments
* Fixes#1985
- add migration AddMediaAttachmentMeta, which add meta field to media_attachments
- before saving attachment, set file meta if needed
- add meta in api
* add spec
* align the “size” format for image and video
* fix code climate
* fixes media_attachment_spec.rb
* Stricter whitelist rules
* Linting
* Added spec for blacklisting
* Test subdomain blacklist on domain whitelist
* No need to split
* Change spec name
This PR fixes I18n.locale for rake middlewares. Mastodon uses Devise that depends on Warden.
Warden::Manager can be found in rake middleware. It is outside of the controller.
In the case of authentication failed, warden calls throw(:warden). At the time Warden::Manager
delegates request to failure_app to generate response and flash[:alert] after catching it.
Unfortunately, I18n.locale is already reset then because I18n.with_locale is enabled only
inside the controller. If we used I18n.locale=, Devise::FailureApp could get the current locale.
* Change ActivityPub paging to match spec. Clean up ActivityPub outbox changes.
* Fix code style and test failures for OutboxController.
* Attempt to fix CI errors.
duplicates. Web UI regenerates UUID for that header every time the compose
form is changed or successfully submitted
Also, fix Farsi i18n overwriting the English one
* Fix#2119 - Whenever about to send a HTTP request, normalize the URI
* Add test for IDN request in FetchLinkCardService
* Perform IDN normalization on domains before they are stored in the DB
* Add failing spec for oauth/authorized_applications controller
* Use explicit reference to flashes partial from admin layout
Because some of the controllers which use the admin layout do not inherit from
application controller, this partial is not in their view path.
* Make private toots get PuSHed to subscription URLs that belong to domains where you have approved followers
* Authorized followers controller, stub for bulk action
* Soft block in the background
* Add simple test for new controller
* Rename Settings::FollowersController to Settings::FollowerDomainsController, paginate results,
rename "private" post setting to "followers-only", fix pagination style, improve post privacy
preferences style, improve warning style
* Extract compose form warnings into own container, show warning when posting to followers-only with unlocked account
* Add failing spec showing that human_locales does not match what i18n knows about
* Add missing `ar` key for arabic to human locales
* Remove duplicate `id` key from available locales
* Sort keys in human locales list
* Add spec for human_locale helper
The two methods `StreamEntriesHelper#stream_link_target` and
`StreamEntriesHelper#acct` are based on checking whether we are running
in an embedded view.
This adds some test helper code to make the testing easier. We extracted
some "magic strings" to constants to lower the coupling in the specs.
The code that generates CSS is based on a lot of boolean conditions.
The possible combinations of these grows exponentially as we add more
conditions.
Since most of the code is conditional on a single boolean, we tested the
following:
1. All `false`
2. All `true`
3. Each individual flag set to `true`
The methods tested are:
* `StreamEntriesHelper#style_classes`
* `StreamEntriesHelper#microformats_classes`
* `StreamEntriesHelper#microformats_h_class`
* Clean up collapsible components
* Expose user Outboxes and AS2 representations of statuses
* Save work thus far.
* Fix bad merge.
* Save my work
* Clean up pagination.
* First test working.
* Add tests.
* Add Forbidden error template.
* Revert yarn.lock changes.
* Fix code style deviations and use localized instead of hardcoded English text.
* Shows confirmed status in list.
* Adds ability to confirm users in admin UI.
* Added new english translations.
* Addresses feedback from #2245.
* More feedback.
* Add spec coverage for settings/two_factor_auth area
* extract setup method for qr code
* Move otp required check to before action
* Merge method only used once
* Remove duplicate view
* Consolidate creation of @codes for backup
* Move settings/2fq#recovery_codes to settings/recovery_codes#create
* Rename settings/two_factor_auth#disable to #destroy
* Add coverage for the otp required path on 2fa#show
* Clean up the recovery codes list styles
* Move settings/two_factor_auth to settings/two_factor_authentication
* Reorganize the settings two factor auth area
Updated to use a flow like:
- settings/two_factor_authentication goes to a #show view which has a button
either enable or disable 2fa on the account
- the disable button turns off the otp requirement for the user
- the enable button cycles the user secret and redirects to a confirmation page
- the confirmation page is a #new view which shows the QR code for user
- that page posts to #create which verifies the code, and creates the recovery
codes
- that create action shares a view with a recovery codes controller which can be
used separately to reset codes if needed
* Add render_views for admin/settings spec
* Add coverage for admin/settings#update
* Add coverage for admin/settings typecasting open_registrations setting
* Simplify how admin/settings finds the value for updating
* Rely on activerecord to not update a value that hasnt changed
* Add coverage for non-existent setting
* Use a constant for boolean settings
* Fix#2108 - Fix gif uploads
Add specs for media attachment gifv conversion
* Add ffmpeg to travis
* Make travis install ffmpeg, not libav
* Switch travis to trusty
* Add routing specs for accounts followers and following actions
* Use more restful route naming for public account follow pages
Moves two actions:
- accounts#followers to accounts/follower_accounts#index
- accounts#following to accounts/following_accounts#index
Adds routing spec to ensure prior URLs are preserved.
* Extract detect_language to separate class
* Use default locale, not just en
* Add spec to confirm that whatlanguage cant identify empty string
* Allow account locale to override default in language detector
* PostStatusService supplies an account to detect language
* Add a ReportFilter class
* Add reports and targeted_reports relationships to Account
* Use ReportFilter from admin/reports controller
* Link to admin/reports filtered views from admin account show view
* Add indexes to reports.account_id and reports.target_account_id
* Remove unused method #set_counters_maps from api controller
* Remove unused method #set_account_counters_maps from api controller
* Remove unused method Account#followers_domains
* Remove unused User.prolific scope
* Add mastodon:users:admins task to list all admin emails
* Use interpolated query style in Account.triadic_closures
* Coverage for Account.triadic_closures
* Move site title helper to instance helper (name change only)
* Remove newline in <title> tag
* Add site_hostname helper method to wrap up local_domain value
* Use site_hostname helper in places that need local_domain value
These were being skipped with `xit`, but we also just added the `unused` task to
the CI server, and it will be caught there. That seems good enough for this,
instead of requiring a full keys check on every local spec suite run.
This change includes:
- Improve the spec coverage for incoming request to the webfinger action
- For requests without an accept header (ie, what a browser might look like),
return a JSON response.
- For requests with an explicit format of xml or json, return that format.
- For requests using an accept header, return that format.
Also adds failing spec showing webfinger does not return xml, which covers the
issue described in: https://github.com/tootsuite/mastodon/issues/1983
Create MediaAttachment but without actual file download when domain is blocked with reject_media set to true
Clean up old media files when creating a new domain block with reject_media set to true
Return remote_url in media attachments API if local file is not present
Undo domain block action in admin UI
Ability to enable reject_media from admin UI
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
* Begin coverage for account search service
* Coverage for hashtag query
* Coverage for calling local vs remote find based on domain presence
* Spec to check that exact matches are not duped
* Coverage of resolve option
* Coverage for account being provided
* Start to refactor account search service
* Isolate query username and domain methods
* Isolate exact_match method
* Extract methods for local and remote results
* Simplify local vs remote and account isoliation
* Extract methods for local and remote results
* Simplify de-dupe of exact match
* Simplify logic to check for non exact remotes
* Cache some methods
* Remove nil from exact_match from results array
* Return exact matches first
* Use find_remote even with no domain
Account.find_local is just an alias for Account.find_remote(user, nil) - so we
can not bother with the conditional here, and call find_remote directly.
* Refresh local info for remote accounts when webfinger returns new values
It only refreshes account info if one of the URLs or the public-key changes,
in which cases it refreshes the full info, re-downloading the feeds from that
user.
Some special handling should probably be done when the public key changes,
but I have been unable to find any use for it in Mastodon yet.
* Re-fetch remote users we aren't subscribed to.
This might induce performance issues, we might want to only do that for users
we explicitly attempted to subscribe but failed to.
* Refactor changes
* Do not refresh existing remote account details more than once a day
* Avoid re-fetching webfinger info in tests unless otherwise specified
This commit introduces Capybara and the first feature spec.
I focused on coverage for log in for the first feature spec because that would
have prevented 624a9a7136 causing #1236.
* Add locale spec with failing locale plus region check
* Use a more accurate locale when supplied by browser headers
Previously we were using a matching option which would use the first locale
available which matched the locale portion, even if a region was specified.
This changes to first try to find an exact match, and then fall back to the
region, and then fall back to the default.
* Clean up default_locale method
* Simplify admin/reports controller filtering for index
* Rename parameter to resolved
* Fix issue where reports view could not access filter_link_to
* Add coverage for admin/reports controller
* DRY up resolution of related reports for target account
* Clean up admin/reports routes
* Add Report#statuses method
* DRY up current account action taken params
* Rubocop styles
* Add request spec for host meta route returning xml
* Add routing spec for xrd routes
* Update well-known routes
* Move webfinger and host-meta actions to their own controllers
* Remove unused account_params method in admin/accounts controller
* Introduce AccountFilter to find accounts
* Use AccountFilter in admin/accounts controller
* Use more restful routes admin silence and suspension area
* Add admin/silences and admin/suspensions controllers
* Remote spec for non-existent entry_classes helper method
This method no longer exists, and is handled by a local variable in a partial
instead.
* Remove spec for non-existent Account#ping! method
The spec was checking the activity_id of the activities held in notifications
within the controller.
Because the activities are different models, it is possible that they are
created with the same database IDs, and when they are this spec fails because an
activity which should not count as a match is counted as one.
* Add basic coverage for settings/exports controller
* Remove unused @account variable from settings/exports controller
* Add coverage for download export actions
* Remove deprecated `render :text` in favor of `send_data` for csv downloads
* Add model to handle exports
* Use Export class in settings/exports controller
* Simplify settings/exports controller methods
* Move settings/export to more restful routes
* Replace will_paginate with kaminari
* Use #page instead of #paginate in controllers
* Replace will_paginate.page_gap with pagination.truncate in i18n
* Customize kaminari views to match prior styles
* Set kaminari options to match prior behavior
* Replace will_paginate with paginate in views
* When avatar/header are GIF, generate static versions.
Account API returns "avatar"/"avatar_static", "header"/"header_static"
Static version is the same as original for other cases
Web UI de-animates avatars in toots, lists of users
Fix#441, fix#596, prerequisite for #1064
* Fix JS test
* Add rake task to generate static avatars/headers from GIF ones, add test
* Add Admin::BaseController to wrap admin area
Extracts the setting of the `admin` layout and verifying that users are admins
to a common base class for the admin/ controllers.
* Add basic coverage for admin/reports and admin/settings controllers
* Allow users to update their Account in the API
It would be nice for API clients to be able to allow users to update
their accounts without having to wrap Mastodon in a web view. This patch
adds an API endpoint to let users submit a PATCH for their account.
Signed-off-by: David Celis <me@davidcel.is>
* Add /api/v1/accounts/update_credentials to the API docs
Signed-off-by: David Celis <me@davidcel.is>
* Clean up SQL output in Tag and Account search methods
* Add basic coverage for Tag.search_for
* Add coverage for Account.search_for
* Add coverage for Account.advanced_search_for
A request to `/test` would show the custom 404 page, but a request to
`/test.test` would return a 404 with an empty body.
This change ignores the format on incoming catch all route requests, so that the
html 404 page is returned on these requests.
* Fix#1141, fix#1126 - Work through UpdateRemoteProfileService for both <feed> and <entry> top-level tags
* Improve code quality, remove line unrelated to fix
This implements all pending specs, and adds additional coverage for the
following functionality:
* Normal status creation
* Creating a reply status
* Creating a sensitive status
* Creating a status with spoiler text
* A status with no spoiler text gets an empty string for spoiler text
* Creating a status with custom visibility
* Creating a status for an application
* Processing mentions
* Processing Hashtags
* Pinging PuSH hubs
* Crawling links
* Attaching media
Checking reblog vs original status was happening in multiple places
across the app. For views, this logic was encapsulated in a helper
method named `proper_status` but in the other layers of the app, the
logic was duplicated.
Because the logic is used at all layers of the app, we extracted it into
a `Status#proper` method on the model and changed all uses of the logic
to use this method. There is now a single source of truth for this
condition.
We added test coverage to untested methods that got refactored.
There are currently not specs for the two media validations that are performed
by `PostStatusService`. This adds specs for the validations that ensure that you
cannot attach more than four files, and that a status cannot have both image and
video attachments.
