* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix#14091
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Check for and record reblog info atomically
Instead of using ZREVRANK to determine whether a reblog is a new reblog or not,
use ZADD's NX option to perform the check/addition option atomically.
* Replace ZREVRANK call with ZSCORE key which is more efficient
* Make tests a bit stricter
* Fix off-by-one
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
Follow-up to #14359
In the case of limited toots, the receiver may not be explicitly part of the
audience. If a specific user's inbox URI was specified, it makes sense to
dereference the toot from the corresponding user, instead of trying to find
someone in the explicit audience.
* Fix not handling Undo on some activity types when they aren't inlined
When receiving an Undo for a non-inlined activity, try looking it up in
database using the URI. The queries are ad-hoc because we don't have a global
index of object URIs, and not all activity types are stored in database with
an index on their URI.
Announces are just statuses, and have an index on URIs, so this check can
be done efficiently.
Accepts cannot be handled at all because we don't record their URI at any
point.
Follows don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
Likes don't have an index on URI, they have an index on the issuing account,
but the number of favs per account may be very high, so I decided not to
handle that.
Blocks don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
In all cases, if an Undo could not be handled properly, we call `delete_later!`
because that does not require us to know more than the URI of the undone
property.
* Add tests
* Make newer blocks overwrite older ones
Allows re-synchronizing block info by re-blocking and un-blocking again
when the original Undo Block has been lost.
* Fix the local group's followers collection
* Fix to accept followed relayed_through_account
* Add local delivery to the group's followers
* Fix code style
* Revert "Add local delivery to the group's followers"
This reverts commit 3237effc19.
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
Thai does not separate words by spaces, so I figured out it should be
in 'reliable characters regexp' that denotes languages that do the same.
Related #13891.
* FIX: filters ignore media descriptions
* remove parentheses to make codeclimate happy
* combine the text and run the regular expression only once.
https://github.com/tootsuite/mastodon/pull/13837#discussion_r431752581
* Fix use of “filter” instead of “compact”, fix coding style issues
Co-authored-by: Thibaut Girka <thib@sitedethib.com>
* Improve RSS entries for statuses
- Render polls in both accounts and tags serializers
- Refactor RSS serializers
- Change title preview to include ellipsis when truncated
- Change title preview to show CW instead of toot text
- Add tests
* Remove title from OEmbed serialization
Twitter doesn't serialize title either, and tihs allows us to move the
title formatting code to the RSS serializers.
* Fix PostgreSQL load when linking in announcements
Fixes#13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
Change `all_day` to be a visual client-side cue only
Publish immediately if `scheduled_at` is in the past
Add `published_at` and `updated_at` to announcements JSON
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
- update http gem to avoid errors
- update blurhash gem to avoid shared object loading error
- update goldfinger gem so the http gem could be updated
- update json gem to avoid warnings
* Fix wrong grouping in Twitter valid_url regex
* Add support for xmpp URIs
Fixes#9776
The difficult part is autolinking, because Twitter-text's extractor does
some pretty ad-hoc stuff to find things that “look like” URLs, and XMPP
URIs do not really match the assumptions of that lib, so it doesn't sound
wise to try to shoehorn it into the existing regex.
This is why I used a specific regex (very close, although slightly more
permissive than the RFC), and a specific scan function (a simplified version
of the generalized one from Twitter).
* Remove leading “xmpp:” from auto-linked text
* Remove “protocol” argument and return value, as only ActivityPub is supported
* Remove FetchRemoteAccountService, only use ActivityPub::FetchRemoteAccountService
* Fix tests
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit dff46b260b.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
This adds support for Event AP type in Mastodon. Events are converted
into toots by taking their title (AS name) and their URL (AP ID). Event
picture is also brought in if available.
Testable by fetching event content from https://test.mobilizon.org
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Show badge on group actor in WebUI
* Do not notify in case of by following group actor
* If you mention group actor, also mention group actor followers
* Relax characters that can be used in username (same as Application)
* Revert "Relax characters that can be used in username (same as Application)"
This reverts commit 7e10a137b8.
* Delete display_name method
Some ActivityPub servers refuse to embed remote objects into their own
output. This is because they are not the authoritative source for these
objects, and as such embedding them is always a waste of space. The
follow request and follow models contain a URI, so this can be used to
match them.
Fetching statuses from all followed accounts at once takes too long
within Postgres. Fetching them one by one and merging in Ruby
could be a lot less resource-intensive
Because the query for dynamically fetching the home timeline is so
heavy, we can no longer offer it when the home timeline is missing
* Add voters count to polls
* Add ActivityPub serialization and parsing of voters count
* Add support for voters count in WebUI
* Move incrementation of voters count out of redis lock
* Reword “voters” to “people”
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* Add some additional node info stuff
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* expanding this to include federation info
* codeclimate feedback
* CC feedback
* using activeserializers seems like a good idea...
* get rid of draft 2.1 version
* Reimplement 2.1, also fix metaData -> metadata
* Fix metaData -> metadata here too
* Fix nodeinfo 2.1 tests
* Implement cache for monthly user aggregate
* Useless
* Remove ostatus from the list of supported protocols
* Fix nodeinfo's open_registration reading obsolete setting variable
* Only serialize domain blocks with user-facing limitations
* Do not needlessly list noop severity in nodeinfo
* Only serialize domain blocks info in nodeinfo when they are set to be displayed to everyone
* Enable caching for nodeinfo endpoints
* Fix rendering nodeinfo
* CodeClimate fixes
* Please CodeClimate
* Change InstancePresenter#active_user_count_months for clarity
* Refactor NodeInfoSerializer#metadata
* Remove nodeinfo 2.1 support as the schema doesn't exist
* Clean-up
* Change silenced accounts to require approval on follow
* Also require approval for follows by people explicitly muted by target accounts
* Do not auto-accept silenced or muted accounts when switching from locked to unlocked
* Add `follow_requests_count` to verify_credentials
* Show “Follow requests” menu item if needed even if account is locked
* Add tests
* Correctly reflect that follow requests weren't auto-accepted when local account is silenced
* Accept follow requests from user-muted accounts to avoid leaking mutes
The reason for unattaching media instead of removing it is to support
delete & redraft functionality, but remote or staff-removed statuses
will never be redrafted, so the media should be deleted immediately
- Restrict followers counts to local users to minimize local advantage
- Fix emoji shortcodes causing error in search
- Fix search syntax parse errors not being caught
* Play animated custom emoji on hover in status
* Play animated custom emoji on hover in display names
* Play animated custom emoji on hover in bios/bio fields
* Add support for animation on hover on public pages emojis too
* Fix tests
* Code style cleanup
* Add support for an instance actor
* Skip username validation for local Application accounts
* Add migration script to create instance actor
* Make Codeclimate happy
* Switch to id -99 for instance actor
* Remove unused `icon` and `image` attributes from instance actor
* Use if/elsif/else instead of return + ternary operator
* Add instance actor to fresh installs
* Use instance actor as instance representative
Use instance actor for forwarding reports, relay operations, and spam
auto-reporting.
* Seed database in test environment
* Fix single-user mode
* Fix tests
* Fix specs to accomodate for an extra `Account`
* Auto-reject follows on instance actor
Following an instance actor might make sense, but we are not handling that
right now, so auto-reject.
* Fix webfinger lookup and serialization for instance actor
* Rename instance actor
* Make it clear in the HTML view that the instance actor should not be blocked
* Raise cache time for instance actor as there's no dynamic content
* Re-use /about/more with a flash message for instance actor profile
* Add a spam check
* Use Nilsimsa to generate locality-sensitive hashes and compare using Levenshtein distance
* Add more tests
* Add exemption when the message is a reply to something that mentions the sender
* Use Nilsimsa Compare Value instead of Levenshtein distance
* Use MD5 for messages shorter than 10 characters
* Add message to automated report, do not add non-public statuses to
automated report, add trust level to accounts and make unsilencing
raise the trust level to prevent repeated spam checks on that account
* Expire spam check data after 3 months
* Add support for local statuses, reduce expiration to 1 week, always create a report
* Add content warnings to the spam check and exempt empty statuses
* Change Nilsimsa threshold to 95 and make sure removed statuses are removed from the spam check
* Add all matched statuses into automatic report
* Disable incorrect check for hidden services in Socket
Hidden services can only be accessed with an HTTP proxy, in which
case the host seen by the Socket class will be the proxy, not the
target host.
Hidden services are already filtered in `Request#initialize`.
* Use our Socket class to connect to HTTP proxies
Avoid the timeout logic being bypassed
* Add support for IP addresses in Request::Socket
* Refactor a bit, no need to keep the DNS resolver around
* Remove Salmon and PubSubHubbub endpoints
* Add error when trying to follow OStatus accounts
* Fix new accounts not being created in ResolveAccountService
* Add request pool to improve delivery performance
Fix#7909
* Ensure connection is closed when exception interrupts execution
* Remove Timeout#timeout from socket connection
* Fix infinite retrial loop on HTTP::ConnectionError
* Close sockets on failure, reduce idle time to 90 seconds
* Add MAX_REQUEST_POOL_SIZE option to limit concurrent connections to the same server
* Use a shared pool size, 512 by default, to stay below open file limit
* Add some tests
* Add more tests
* Reduce MAX_IDLE_TIME from 90 to 30 seconds, reap every 30 seconds
* Use a shared pool that returns preferred connection but re-purposes other ones when needed
* Fix wrong connection being returned on subsequent calls within the same thread
* Reduce mutex calls on flushes from 2 to 1 and add test for reaping
* Change domain blocks to automatically support subdomains
If a more authoritative domain is blocked (example.com), then the
same block will be applied to a subdomain (foo.example.com)
* Match subdomains of existing accounts when blocking/unblocking domains
* Improve code style
* Add responsive panels to the single-column layout
* Fixes
* Fix not being able to save the preference
* Fix code style issues
* Set max-height on the compose textarea and add a link to relationship manager
* Prevent silenced local users from notifying remote users not following them
This is an attempt to extend the local restrictions of silenced users to the
federation.
* Add tests
* Add tests for making sure private status don't get sent over OStatus
* Add blurhash
* Use fallback color for spoiler when blurhash missing
* Federate the blurhash and accept it as long as it's at most 5x5
* Display unknown media attachments as blurhash placeholders
* Improve style of embed actions and spoiler button
* Change blurhash resolution from 3x3 to 4x4
* Improve dependency definitions
* Fix code style issues
* Backend changes for custom emoji support in poll options
* Serialize poll emojis in REST API
* Render custom emojis in poll options
* Render custom emoji in poll options on public pages
* create account_identity_proofs table
* add endpoint for keybase to check local proofs
* add async task to update validity and liveness of proofs from keybase
* first pass keybase proof CRUD
* second pass keybase proof creation
* clean up proof list and add badges
* add avatar url to keybase api
* Always highlight the “Identity Proofs” navigation item when interacting with proofs.
* Update translations.
* Add profile URL.
* Reorder proofs.
* Add proofs to bio.
* Update settings/identity_proofs front-end.
* Use `link_to`.
* Only encode query params if they exist.
URLs without params had a trailing `?`.
* Only show live proofs.
* change valid to active in proof list and update liveness before displaying
* minor fixes
* add keybase config at well-known path
* extremely naive feature flagging off the identity proof UI
* fixes for rubocop
* make identity proofs page resilient to potential keybase issues
* normalize i18n
* tweaks for brakeman
* remove two unused translations
* cleanup and add more localizations
* make keybase_contacts an admin setting
* fix ExternalProofService my_domain
* use Addressable::URI in identity proofs
* use active model serializer for keybase proof config
* more cleanup of keybase proof config
* rename proof is_valid and is_live to proof_valid and proof_live
* cleanup
* assorted tweaks for more robust communication with keybase
* Clean up
* Small fixes
* Display verified identity identically to verified links
* Clean up unused CSS
* Add caching for Keybase avatar URLs
* Remove keybase_contacts setting
* Fix poll update handler calling method was that was not available
Fix regression from #10209
* Refactor VoteService
* Refactor ActivityPub::DistributePollUpdateWorker and optimize it
* Fix typo
* Fix typo
* Process incoming poll tallies update
* Send Update on poll vote
* Do not send Updates for a poll more often than once every 3 minutes
* Include voters in people to notify of results update
* Schedule closing poll worker on poll creation
* Add new notification type for ending polls
* Add front-end support for ended poll notifications
* Fix UpdatePollSerializer
* Fix Updates not being triggered by local votes
* Fix tests failure
* Fix web push notifications for closing polls
* Minor cleanup
* Notify voters of both remote and local polls when those close
* Fix delivery of poll updates to mentioned accounts and voters
* When serializing polls over OStatus, serialize poll options to text
* Do the same for RSS feeds
* Use “[ ] ” as a prefix for poll options instead of “- ”
* Add polls
Fix#1629
* Add tests
* Fixes
* Change API for creating polls
* Use name instead of content for votes
* Remove poll validation for remote polls
* Add polls to public pages
* When updating the poll, update options just in case they were changed
* Fix public pages showing both poll and other media
* Fetch up to 5 replies when discovering a new remote status
This is used for resolving threads downwards. The originating
server must add a “replies” attributes with such replies for it to
be useful.
* Add some tests for ActivityPub::FetchRepliesWorker
* Add specs for ActivityPub::FetchRepliesService
* Serialize up to 5 public self-replies for ActivityPub notes
* Add specs for ActivityPub::NoteSerializer
* Move exponential backoff logic to a worker concern
* Fetch first page of paginated collections when fetching thread replies
* Add specs for paginated collections in replies
* Move Note replies serialization to a first CollectionPage
The collection isn't actually paginable yet as it has no id nor
a `next` field. This may come in another PR.
* Use pluck(:uri) instead of map(&:uri) to improve performances
* Fix fetching replies when they are in a CollectionPage
`::FetchRemoteAccountService` is not `ActivityPub::FetchRemoteAccountService`,
its second argument is the pre-fetched body. Passing `id: false` actually passed
a `Hash` as the prefetched body, instead of properly resolving unknown remote
accounts.
* Filter incoming Announce activities by relation to local activity
Reject if announcer is not followed by local accounts, and is not
from an enabled relay, and the object is not a local status
Follow-up to #10005
* Fix tests
Reject those from accounts with no local followers, from relays
that are not enabled, which do not address local accounts and are
not replies to accounts that do have local followers
* When self-boosting, embed original toot into Announce serialization
* Process unknown self-boosts from Announce object if it is more than an URI
* Add some self-boost specs
* Only serialize private toots in self-Announces
* Add Tombstone model to remember object deletion
* Do not recreate a status if it has been deleted
* Record Tombstone for remote deleted items
Also, only record deleted items from same-host actors
* Clear an user's tombstones when their key change
* Ensure blocked user unfollows blocker if Block/Undo Block are processed out of order
* Add specs for Block causing unfollow and for out-of-order Block + Undo
* Do not LDS-sign Follow, Accept, Reject, Undo, Block
* Do not use LDS for Create activities of private toots
* Minor cleanup
* Ignore unsigned activities instead of misattributing them
* Use status.distributable? instead of querying visibility directly
* Add setting to not aggregate reblogs
Fixes#9222
* Handle cases where user is nil in add_to_home and add_to_list
* Add hint for setting_aggregate_reblogs option
* Reword setting_aggregate_reblogs label
* Fix connect timeout not being enforced
The loop was catching the timeout exception that should stop execution, so the next IP would no longer be within a timed block, which led to requests taking much longer than 10 seconds.
* Use timeout on each IP attempt, but limit to 2 attempts
* Fix code style issue
* Do not break Request#perform if no block given
* Update method stub in spec for Request
* Move timeout inside the begin/rescue block
* Use Resolv::DNS with timeout of 1 to get IP addresses
* Update Request spec to stub Resolv::DNS instead of Addrinfo
* Fix Resolve::DNS stubs in Request spec
* Add silent column to mentions
* Save silent mentions in ActivityPub Create handler and optimize it
Move networking calls out of the database transaction
* Add "limited" visibility level masked as "private" in the API
Unlike DMs, limited statuses are pushed into home feeds. The access
control rules between direct and limited statuses is almost the same,
except for counter and conversation logic
* Ensure silent column is non-null, add spec
* Ensure filters don't check silent mentions for blocks/mutes
As those are "this person is also allowed to see" rather than "this
person is involved", therefore does not warrant filtering
* Clean up code
* Use Status#active_mentions to limit returned mentions
* Fix code style issues
* Use Status#active_mentions in Notification
And remove stream_entry eager-loading from Notification
* Downcase signed_headers string before building the signed string
The HTTP Signatures draft does not mandate the “headers” field to be downcased,
but mandates the header field names to be downcased in the signed string, which
means that prior to this patch, Mastodon could fail to process signatures from
some compliant clients. It also means that it would not actually check the
Digest of non-compliant clients that wouldn't use a lowercased Digest field
name.
Thankfully, I don't know of any such client.
* Revert "Remove dead code (#8919)"
This reverts commit a00ce8c92c.
* Restore time window checking, change it to 12 hours
By checking the Date header, we can prevent replaying old vulnerable
signatures. The focus is to prevent replaying old vulnerable requests
from software that has been fixed in the meantime, so a somewhat long
window should be fine and accounts for timezone misconfiguration.
* Escape users' URLs when formatting them
Fixes possible HTML injection
* Escape all string interpolations in Formatter class
Slightly improve performance by reducing class allocations
from repeated Formatter#encode calls
* Fix code style issues
Mention and emoji code may perform network calls, but does not need
to do that inside the database transaction. This may improve availability
of database connections when using pgBouncer in transaction mode.
* Add conversations API
* Add web UI for conversations
* Add test for conversations API
* Add tests for ConversationAccount
* Improve web UI
* Rename ConversationAccount to AccountConversation
* Remove conversations on block and mute
* Change last_status_id to be a denormalization of status_ids
* Add optimistic locking
* Changed list behaviour
I added the following line to the FeedManager (app/lib/feed_manager.rb) in the push_to_list function:
`return false if status.reply?`
Now all posts that are replies are filtered out, so that now only "genuine" posts are displayed in the list.
This is a first approach to solve issue #5916
* Update feed_manager.rb
As suggested by @Gargron
* Verify link ownership with rel="me"
* Add explanation about verification to UI
* Perform link verifications
* Add click-to-copy widget for verification HTML
* Redesign edit profile page
* Redesign forms
* Improve responsive design of settings pages
* Restore landing page sign-up form
* Fix typo
* Support <link> tags, add spec
* Fix links not being verified on first discovery and passive updates
* Add animate custom emoji param to embed pages
* Rename param, use it for avatars and gifs
* Fix issues pointed by codeclimate and breaking test
* Ignore brakeman warning
* If an Update is signed with known key, skip re-following procedure
Because it means the remote actor did *not* lose their database
* Add CLI method for rotating keys
bin/tootctl accounts rotate [USERNAME]
Generates a new RSA key per account and sends out an Update activity
signed with the old key.
* Key rotation: Space out Update fan-outs every 5 minutes per 1000 accounts
* Skip suspended accounts in key rotation
* Add default_settings class method to ScopedSettings
ScopedSettings was extended to use value of unscoped setting instead of
only using defaults set in config/settings.yml for selected settings.
This adds possibility for admins to set default values of users' settings,
for example default theme (as requested in #7092).
* Add ability to change an instance default theme
Closes#7092
If the input text is blank after preparation (only mention, or
only URL, or empty as in a media post), then use nil as language,
since it's OK to show to everyone.
Otherwise, always fall back to the server's default locale
* Re-add follow recommendations API
GET /api/v1/suggestions
Removed in 8efa081f21 due to Neo4J
dependency. The algorithm uses triadic closures, takes into account
suspensions, blocks, mutes, domain blocks, excludes locked and moved
accounts, and prefers more recently updated accounts.
* Track interactions with people you don't follow
Replying to, favouriting and reblogging someone you're not following
will make them show up in follow recommendations. The interactions
have different weights:
- Replying is 1
- Favouriting is 10 (decidedly positive interaction, but private)
- Reblogging is 20
Following them, muting or blocking will remove them from the list,
obviously.
* Remove triadic closures, ensure potential friendships are trimmed
If Mastodon accesses to the hidden service via transparent proxy, it's needed to avoid checking whether it's a private address, since `.onion` is resolved to a private address.
I was previously using the `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` to provide that function. However, I realized that using `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` is redundant, since this specification is always used with `ALLOW_ACCESS_TO_HIDDEN_SERVICE`. Therefore, I decided to integrate the setting of `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` into` ALLOW_ACCESS_TO_HIDDEN_SERVICE`.
* Add keyword filtering
GET|POST /api/v1/filters
GET|PUT|DELETE /api/v1/filters/:id
- Irreversible filters can drop toots from home or notifications
- Other filters can hide toots through the client app
- Filters use a phrase valid in particular contexts, expiration
* Make sure expired filters don't get applied client-side
* Add missing API methods
* Remove "regex filter" from column settings
* Add tests
* Add test for FeedManager
* Add CustomFilter test
* Add UI for managing filters
* Add streaming API event to allow syncing filters
* Fix tests
* Do not accept ActivityPub follow requests from blocked user
Fix#7745
* Deliver auto-rejection immediately when follow-requested by blocked account
* Fix trailing whitespace
* Add preference to hide following/followers lists
- Public pages
- ActivityPub collections (does not return pages but does give total)
- REST API (unless it's your own) (does not federate)
Fix#6901
* Add preference
* Add delegation
* Fix issue
* Fix issue
When an ActivityPub Announce is processed and the boosted toot is not known,
fetch it on behalf of one of the booster's followers. This is to allow
fetching self-boosts of previously-unknown private toots.
If fetching on behalf of a user fails, try fetching it anonymously: the
selected follower of a boosting user may be banned by the boosted toot's
author.
* If an OStatus message contains nsfw hashtag, mark it as sensitive
Undo parts of #7048
* Put nsfw hashtag on OStatus messages if they have any media
* Fix code style issues
Same URI passed between follow request and follow, since they are
the same thing in ActivityPub. Local URIs are generated during
creation using UUIDs and are passed to serializers.
* Revert "Fixes/do not override timestamps (#7331)"
This reverts commit 581a5c9d29.
* Document Snowflake ID corner-case a bit more
Snowflake IDs are used for two purposes: making object identifiers harder to
guess and ensuring they are in chronological order. For this reason, they
are based on the `created_at` attribute of the object.
Unfortunately, inserting items with older snowflakes IDs will break the
assumption of consumers of the paging APIs that new items will always have
a greater identifier than the last seen one.
* Add `override_timestamps` virtual attribute to not correlate snowflake ID with created_at
* Do not override timestamps for incoming toots
* Remove every reference to override_timestamps
Statuses are now created with the announced publishing date
and are only pushed to timelines if that date is at most
6 hours earlier than the time at which it is processed.
* No need to re-require sidekiq plugins, they are required via Gemfile
* Add derailed_benchmarks tool, no need to require TTY gems in Gemfile
* Replace ruby-oembed with FetchOEmbedService
Reduce startup by 45382 allocated objects
* Remove preloaded JSON-LD in favour of caching HTTP responses
Reduce boot RAM by about 6 MiB
* Fix tests
* Fix test suite by stubbing out JSON-LD contexts
* Remove most behaviour disparities between blocks and mutes
The only differences between block and mute should be:
- Mutes can optionally NOT affect notifications
- Mutes should not be visible to the muted
Fix#7230Fix#5713
* Do not allow boosting someone you blocked
Fix#7248
* Do not allow favouriting someone you blocked
* Fix nil error in StatusPolicy
* Add equals_or_includes_any? helper in JsonLdHelper
* Support arrays in JSON-LD type fields for actors/tags/objects.
* Spec for resolving accounts with extension types
* Style tweaks for codeclimate
Just don't try to save space by only selecting few attributes. If
anyone is wondering, this is needed because the emoji entity cache
is not really only used for entities, it's accessed again to
generate Emoji tags in ActivityPub/OStatus, so a lot more properties
are used than what is needed in HTML alone...
* Add entity cache
Use a caching layer for mentions and custom emojis that are
dynamically extracted from text.
Reduce duplicate text extractions
* Fix code style issue
* Add support for HTTP client proxy
* Add access control for darknet
Supress error when access to darknet via transparent proxy
* Fix the codes pointed out
* Lint
* Fix an omission + lint
* any? -> include?
* Change detection method to regexp to avoid test fail
* Add bio fields
- Fix#3211
- Fix#232
- Fix#121
* Display bio fields in web UI
* Fix output of links and missing fields
* Federate bio fields over ActivityPub as PropertyValue
* Improve how the fields are stored, add to Edit profile form
* Add rel=me to links in fields
Fix#121
* Enable updating additional account information from user preferences via rest api
Resolves#6553
* Pacify rubocop
* Decoerce incoming settings in UserSettingsDecorator
* Create user preferences hash directly from incoming credentials instead of going through ActionController::Parameters
* Clean up user preferences update
* Use ActiveModel::Type::Boolean instead of manually checking stringified number equivalence
to_s method of HTTP::Response keeps blocking while it receives the whole
content, no matter how it is big. This means it may waste time to receive
unacceptably large files. It may also consume memory and disk in the
process. This solves the inefficency by checking response length while
receiving.
HTTP connections must be explicitly closed in many cases, and letting
perform method close connections makes its callers less redundant and
prevent them from forgetting to close connections.
* request: in the event of failure, try other IPs (#6761)
In the case where a name has multiple A/AAAA records, we should
try subsequent records instead of immediately failing when we have a
failure on the first IP address.
This significantly improves delivery success when there are network
connectivity problems affecting only IPv4 or IPv6.
* fix method call style
* request_spec: adjust test case to use Addrinfo
* request: Request/open: move private addr check to within begin/rescue
* request_spec: add case to test failover, fix exception check
* Double Addrinfo.foreach so that it correctly yields instances
Up until now, the order seemed to be in the *opposite* order,
which caused the WebUI to populate mentions in reversed order
when replying to toots local to one's instance.
* fix validation error (media only status)
* Incorporating review suggestions
* Reflect similar fix to OStatus side
* Fix not to include media in transaction
* Restore the limit of the number of media
* Fix not to return nil
A complemental change for precompute_feed_service_spec.rb also fixes its
random failure which is caused by the Snowlake randomization of the order
of an original status and its reblog.
* Add focus param to media API, center thumbnails on focus point
* Add UI for setting a focal point
* Improve focal point icon on upload item
* Use focal point in upload preview
* Add focalPoint property to ActivityPub
* Don't show focal point button for non-image attachments
* Fix avatar and header issues by using custom geometry detector
Revert a part of #6508. The file passed to dynamic styles method
was not actually a file, but an instance of Paperclip::Attachment,
which broke all styles by always returning {} from the method.
One problem with GIF avatars was that Paperclip::GeometryDetector
reported wrong dimensions for them, e.g. 120x120 GIF avatar would
for some reason be detected as 120x53. By writing our own geometry
parser, we can use FastImage, which also happens to be faster than
ImageMagick, to detect image dimensions, which are also correct.
Unfortunately, this PR does not implement skipping a `convert`
entirely if the dimensions are already correct, as I found no easy
way to write that behaviour into Paperclip without rewriting the
Paperclip::Thumbnail class.
* Only invoke convert if dimension or format needs to be changed
* Add full-text search for authorized statuses
- Search API will return statuses that match the query
- Only for logged in users
- Only if you are author of the status,
- Or you were mentioned in it
- Or you favourited or reblogged it
- Configuration over `ES_ENABLED`, `ES_HOST`, `ES_PORT`, `ES_PREFIX`
- Run `rails chewy:deploy` to create & populate index
Fix#5880Fix#4293Fix#1152
* Add commented out docker-compose configuration for ES container
* Optimize index import, filter search results
* Add basic normalization to the index
* Add better stemming and normalization to the index
* Skip webfinger request if search query includes both @ and a space
* Fix code style
* Visually separate search result sections
* Fix code style issues
This makes slightly more sense, and ensures that the author of a post is always referenced in the audience (which some servers might rely on). And the announce is POSTed to the author's inbox anyways.
* Fix actors accepting invalid URI schemes or different host between URI and URL
* Fix statuses accepting invalid URI scheme or different host to actor
* Adjust tests to new requirements
* Improve readability of mismatching_origin?/invalid_origin? methods
* Don't normalize URLs in toots
URL normalization is ill-defined and may cause certain links to break.
* Change specs since we are not normalizing user-provided URLs
* Sanitize classlist properly
* Actually properly sanitize every class after the first
* Improve Formatter spec to check for multiple classes and non-space whitespace
There's no reason for an Account record to persist after Delete->Actor is received. SuspendAccountService is necessary to make sure deleted toots get sent over streaming API properly and home feeds get cleaned up. By removing Account record, we can ensure that if in the future the account is restored remotely (or username reused), it can start with a clean slate.
* Add GET /api/v1/instance/peers API to reveal known domains
* Add GET /api/v1/instance/activity API
* Make new APIs disableable, exclude private statuses from activity stats
* Fix code style issue
* Fix week timestamps
* Add semi-support for Video/Image objects in ActivityPub
Video and Image objects will create corresponding status records
with manually crafted text contents (title + URL)
* Extract html-url-finding logic into JsonLdHelper
* Fallback to id when url missing, extract supported object types
* Avoid sending explicit Undo->Announce when original deleted
* Do not forward a reply back to the server that sent it
* Deduplicate inboxes of rebloggers' followers for delete forwarding
* Adjust test
* Fix wrong class, bad SQL, wrong variable, outdated comment
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Serialize moved accounts into REST and ActivityPub APIs
* Parse federated moved accounts from ActivityPub
* Add note about moved accounts to public profiles
* Add moved account message to web UI
* Fix code style issues
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
* Scrub text of html before detecting language.
* Detect language on statuses coming from activitypub.
* Fix rubocop comments.
* Remove custom emoji from text before language detection
* Clean up reblog-tracking sets from FeedManager
Builds on #5419, with a few minor optimizations and cleanup of sets
after they are no longer needed.
* Update tests, fix multiply-reblogged case
Previously, we would have lost the fact that a given status was
reblogged if the displayed reblog of it was removed, now we don't.
Also added tests to make sure FeedManager#trim cleans up our reblog
tracking keys, fixed up FeedCleanupScheduler to use the right loop,
and fixed the test for it.
* Keep references to all reblogs of a status on home feed
When inserting reblog: Add to set of reblogs of this status on
the feed, if original status was present in the feed, add it to
that set as well.
When removing a reblog: Remove it from that set. Take random
remaining item from the set. If one exists, re-insert it into feed,
otherwise do not re-insert anything.
Fix#4210
* When original is removed, toss out reblog references
Fix#5398
Ordering the home timeline query by account_id meant that the first
100 items belonged to a single account. There was also no reason to
reverse-iterate over the statuses. Assuming the user accesses the
feed halfway-through, it's better to have recent statuses already
available at the top. Therefore working from newer->older is ideal.
If the algorithm ends up filtering all items out during last-mile
filtering, repeat again a page further. The algorithm terminates
when either at least one item has been added, or if the database
query returns nothing (end of data reached)
We've changed un-reblogging behavior when we implement Snowflake, to insert un-reblogged status at the position reblogging status existed.
However, our API expects home timeline is ordered by status ids, and max_id/since_id filters by zset score. Due to this, un-reblogged status appears as a last item of result set, and timeline expansion may skips many statuses.
So this reverts that change...reblogged status inserted at corresponding position to its id.
* Add option to reduce motion
* Use HOC to wrap all Motion calls
* fix case-sensitive issue
* Avoid updating too frequently
* Get rid of unnecessary change to _simple_status.html.haml
- For some reason, :if option on before_action did not work. It got
executed every time, returned false, and the action run anyway,
which led to the current_sign_in_at and sign_in_count being
updated on every request
- Return "do not filter" early in FeedManager#filter_from_home? if
the status is authored by receiver. Usually this method is not
called for own statuses at all, but it is called when Feed#get
uses the database
- Return early if #reload_stale_associations! has nothing to load
to save a database query with WHERE 1=0
Do NOT send "delete" through streaming API when unmerging from
home timeline. "delete" implies that the original status was
deleted, which is not true!
- Rename Mastodon::TimestampIds into Mastodon::Snowflake for clarity
- Skip for statuses coming from inbox, aka delivered in real-time
- Skip for statuses that claim to be from the future
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to 591a9af356 from
#5019, with an extra change for the addition to FeedManager#unpush.
* Ensure we have a status_id_seq sequence
Apparently this is not a given when specifying a custom ID function,
so now we ensure it gets created. This uses the generic version of this
function to more easily support adding additional tables with timestamp
IDs in the future, although it would be possible to cut this down to a
less generic version if necessary. It is only run during db:schema:load
or the relevant migration, so the overhead is extraordinarily minimal.
* Transition reblogs to new Redis format
This provides a one-way migration to transition old Redis reblog entries
into the new format, with a separate tracking entry for reblogs.
It is not invertible because doing so could (if timestamp IDs are used)
require a database query for each status in each users' feed, which is
likely to be a significant toll on major instances.
* Address review comments from @akihikodaki
No functional changes.
* Additional review changes
* Heredoc cleanup
* Run db:schema:load hooks for test in development
This matches the behavior in Rails'
ActiveRecord::Tasks::DatabaseTasks.each_current_configuration, which
would otherwise break `rake db:setup` in development.
It also moves some functionality out to a library, which will be a good
place to put additional related functionality in the near future.
Additionally, ActivityPub::FetchRemoteStatusService no longer parses
activities.
OStatus::Activity::Creation no longer delegates to ActivityPub because
the provided ActivityPub representations are not signed while OStatus
representations are.
I see no reason to allow more than that. Usually a redirect is
HTTP->HTTPS, then maybe URL structure changed, but more than that
is highly unlikely to be a legitimate use case.
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
* Add support for selecting a theme
* Fix codeclimate issues
* Look up site default style if current user is not available due to e.g. not being logged in
* Remove outdated comment in common.js
* Address requested changes in themes PR
* Fix codeclimate issues
* Explicitly check current_account in application controller and only check theme availability if non-nil
* codeclimate
* explicit precedence with &&
* Fix code style in application_controller according to @nightpool's suggestion, use default style in embedded.html.haml
* codeclimate: indentation + return
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
